Epson 20 Manuel D’Utilisation

2. If an application routine does not work, check the program’s

manual and try the routine again according to the instructions. If
this does not work, reset the computer, reload the program, and
try the routine again.

3. Some programs work at only one operating speed. The Equity 386

can run at either 8 or 20 MHz. Check your software manual for

this information and then change the CPU operating speed if
necessary. Also see the description of the Auto speed function in

Chapter 2 for information on accommodating copy-protected

programs.

Your printer manual describes solutions for most potential printer

problems.

If your printer does not work correctly immediately after you install it,
check that the printer has power and is properly connected to the

computer. Your printer manual provides detailed instructions on how
to connect your printer to the computer. Also, see your software
manual to make sure your software is set up correctly for your printer.

If you have problems during printing, check the printer manual for

the printer’s correct DIP switch or control panel settings. These
settings help a printer communicate properly with the computer. You

may need to make an adjustment for your configuration.

If you install an option card and get unexpected results, check the

following:

1. Is the option card installed correctly? Check the installation

procedure described in Chapter 6 and also see the instructions

that come with the option card.

2. Did you set the necessary DIP switches or jumpers on the option

card? See your option card instructions for these settings.