Epson 20 Manuel D’Utilisation

If you do not have a light pen attached, press 

N 

and 

Enter. 

To begin

the test, press Y and 

Enter. 

You see this prompt:

PLACE LIGHT PEN ON CENTER OF WHITE BLOCK

Touch the center of the white block on the screen with the light pen.
When the light pen is correctly positioned, the block moves to

another part of the screen for a second test. After three successful
tests, the check ends.

An error occurs if one of the following is true:

l

The light pen is not connected properly

l

The light pen is malfunctioning

l

You do not touch the square within 12 seconds.

This test displays 16 different screens, each a different color, and a

message indicating the color. The screens show the following colors in
the order specified below:

1 - Black

- Gray

2 - Blue

10 - Light blue

- Green

11 - Light green

- Cyan

12 - Light cyan

5 - Red

13 - Light red

6 - Magenta

14 - Light magenta

7 - Brown

15 - Yellow

8 - White

16 - White (high intensity)

To start this test, press 9 and 

Enter. 

Press any key to display each

screen. On the last screen, you see this prompt:

Is the display correct (Y/N)?

If all the colors are correct, press Y and 

Enter 

to end the test. If any

color is incorrect, first check the adjustment of your monitor, and

then make sure that both ends of the cable are plugged in firmly. If a
problem still exists, press 

N 

and 

Enter 

to display the error message.