Epson 20 Manuel D’Utilisation
Changing the Default Drive
To change the default drive, type the letter of the drive you want to
change to, followed by a colon. Then press
Enter.
For example, to
change the default from A to C, type C : and press
Enter.
MS-DOS
acknowledges the change by displaying the command prompt C >.
Changing to a new drive is also sometimes called logging onto that
Changing to a new drive is also sometimes called logging onto that
drive.
To access a program or file without first changing the default drive,
use a drive identifier with the filename. For example, if you are logged
onto drive A and type B : PROGRAM, MS-DOS loads and executes the
file named PROGRAM from drive B but stays logged onto drive A.
onto drive A and type B : PROGRAM, MS-DOS loads and executes the
file named PROGRAM from drive B but stays logged onto drive A.
The MS-DOS Command Format
To enter an MS-DOS command, you need to type the command in
the correct format. The command format provides MS-DOS with the
information needed to perform a task.
The MS-DOS command format consists of the command name,
parameters, and delimiters. The command name tells MS-DOS the
task you want the computer to perform. Parameters specify details
task you want the computer to perform. Parameters specify details
such as what data you want to process and where to locate or store a
file. Delimiters are characters such as spaces or commas that separate
command names and parameters.
For example, the command to format a diskette in drive A is:
FORMAT A:
FORMAT is the command name to execute the file FORMATCOM.
The A: is a parameter that tells the command what to format-in this
case, the diskette in drive A. The space between FORMAT and A: is
the delimiter that lets MS-DOS distinguish the command name
(FORMAT) from the parameter (A:).
Using
MS-DOS with Your
Equity 386
5-3