Hand Held Products 7200/UG Manuel D’Utilisation

C H A P T E R   2     D O L P H I N   B A S I C S  

 32

32

32

32  

Laser Engine 

The Dolphin 7200 is currently available with five scanning options: 

•  Standard range 

•  Long range 

•  High density scanning 

•  High visibility scanning 

•  No scan engine 

The laser engine converts reflected light into a digital pattern that represents the bar 

code data.  A clear window covers the laser engine to protect it from dust and dirt. 

Image Engine 

The Dolphin 7200 2D terminal is available with the following imaging options: 

•  Standard image engine: scans 2 to 9 in. (5 to 23cm)  

•  High-Density: scans 2 to 4 in. (5 to 12cm) 

Lanyard Eyelet for Optional Wrist Strap 

This feature allows a strap to be attached to the Dolphin terminal so that it can be 

conveniently secured around the wrist or hooked on to a belt.  Not available on the 

Dolphin 7200 RF, Dolphin 7200 with Image-Capture or the Dolphin 7200 2D 

terminals. 

Battery Well 

The Battery Well is a recessed area on the back of the 

Dolphin that holds the 3.6V battery pack. 

Reset Switch 

The Reset Switch is located inside the Dolphin terminal and is accessible through a 

small opening within the battery well.  To reset the Dolphin, remove the label covering 

the opening and press the reset switch with a small blunt object such as a paper clip. 

Infrared Communications Port 

The Infrared Communications Port allows the Dolphin to communicate through the 

Dolphin HomeBase to a host serial device. 

Battery Charging Contacts 

When the Dolphin is placed in the main well of the Dolphin HomeBase, the 

Dolphin’s battery pack is charged through these contacts. 

 

N O T E