Hand Held Products 7200/UG Manuel D’Utilisation

C H A P T E R   7     U S I N G   T H E   D O L P H I N   7 2 0 0   H O M E B A S E    
 

 98

98

98

98  

Charging Batteries In The Dolphin 7200 HomeBase 

 

With the Dolphin HomeBase, you can charge a Dolphin terminal and a spare NiMH 

battery pack simultaneously. The HomeBase charges the terminal and the spare battery 

pack independently.   

When you insert a battery into the Dolphin HomeBase, it charges the battery at the 

highest rate possible.  The HomeBase uses a charging method that senses when the 

battery pack is fully charged and then drops to a trickle charge to keep the battery pack 

at full capacity. You do not need to discharge the battery pack before recharging 

because this method protects the battery from damage caused by overcharging.  A 

dead battery will charge to full capacity in approximately three hours. 

The Dolphin Terminal can be stored indefinitely in the HomeBase without damage to 

the terminal, battery packs, or the HomeBase.  Keep the HomeBase plugged in so that 

the Dolphin Terminal’s battery pack stays fully charged. 

Charging A Dolphin Terminal 

1. 

Insert a battery pack into the Dolphin Terminal. 

2. 

Place the terminal, laser engine window up and the LCD visible, in the Dolphin 

Terminal Well of the Dolphin HomeBase.   

3. 

Let it glide down into the well until it stops.   

4. 

Once the Dolphin Terminal is properly seated, the Charging Main Batt LED on 

the HomeBase will be solid GREEN. 

 

N O T E