Apple 7200/90 Manuel D’Utilisation
![Apple](https://files.manualsbrain.com/attachments/2c022a7d1a76dcd8f02c04aa8d97faf41b63902f/common/fit/150/50/8a691e9df6162751590e2cef93a951cf3a39c94b6949421016232655b22d/brand_logo.png)
Troubleshooting
Symptom Charts/Miscellaneous - 25
Identifying Logic Boards
As a general rule, if the Power Macintosh 7200/90 computer has
a serial number of xx545xxxxxx or higher, then the computer
should have the revised logic board already installed. If the
computer has a serial number of xx544xxxxxx, xx543xxxxxx or
below, verify that the board is revised as follows:
Look at location G1; G1 is located next to the internal 50-pin SCSI
connector and the CURIO ASIC.
• If a 20 MHz oscillator is present at location G1, the logic
board has been revised.
• If a 20 MHz oscillator is not present (four blank solder
pads) then the board has not been revised and should be
replaced under warranty.