Advantech MDPC-4090 Manuel D’Utilisation
MDPC-4090 User Manual
26
Chapter 5 Audio Interface
5.1 Introduction
MDPC-4090's on-board audio interface provides high-quality stereo
sound and FM music synthesis (ESFM) by using the ALC202 audio con-
troller from Realtek. The audio interface can record, compress, and play
back voice, sound, and music with a built-in mixer control. The
MDPC-4090's onboard audio interface also supports the Plug & Play
(PnP) standard and provides PnP configuration for audio, FM, and MPU-
104 logical devices. It is compatible with Sound Blaster, Sound Blaster
Pro version 3.01, voice, and music functions. The ESFM synthesizer is
register compatible with OPL3 and has extended capabilities.
sound and FM music synthesis (ESFM) by using the ALC202 audio con-
troller from Realtek. The audio interface can record, compress, and play
back voice, sound, and music with a built-in mixer control. The
MDPC-4090's onboard audio interface also supports the Plug & Play
(PnP) standard and provides PnP configuration for audio, FM, and MPU-
104 logical devices. It is compatible with Sound Blaster, Sound Blaster
Pro version 3.01, voice, and music functions. The ESFM synthesizer is
register compatible with OPL3 and has extended capabilities.
5.2 Installation of Audio Driver
Before installing the audio driver, please take note of the procedures
detailed below. You must know which operating system you are using in
your MDPC-4090, and then refer to the corresponding installation flow
chart. Just follow the steps in the flow chart. You can quickly and suc-
cessfully complete the installation, even though you are not familiar with
instructions for Windows.
detailed below. You must know which operating system you are using in
your MDPC-4090, and then refer to the corresponding installation flow
chart. Just follow the steps in the flow chart. You can quickly and suc-
cessfully complete the installation, even though you are not familiar with
instructions for Windows.
Important
The following Windows illustrations are examples
only. You must follow the flow chart instructions
and pay attention to the instructions which appear
on your screen.
only. You must follow the flow chart instructions
and pay attention to the instructions which appear
on your screen.
Note1
The CD-ROM drive is designated as “D” through-
out this chapter.
out this chapter.
Note2
<Enter> means pressing the “Enter” key on the
keyboard.
keyboard.