Emerson 7400 Manuel D’Utilisation

 

 

57 

Series 7400 Single Phase 1+N UPS 

 

Inter Connection cable details 
Any system essentially needs UPS module. However many 

customers need auxiliary cubicles such as Input Isolation 

Transformers, Battery Current Sharing Kit, 1+1 Paralleling kit, 

Bypass SCVS / SVR or Bypass Line Transformers. In case any of 
the auxiliary cubicle or combination of them is required & ordered 

by the customer, we would like to recommend following sequence 

in which the cubicles shall be located. 

 

 

 

 

 

It should be noted that this is the recommended panel line up & 
based on this line up we will provide all interconnection cables. The 

interconnecting cables are supplied only if auxiliaries are in ENP’s 

scope. ENP is not responsible for supply of these interconnection 

cables in case the recommended Line up is altered. It is presumed 
that 

 

a) 

All the panels are in single line up. 

b) 

All the panels are placed in such a way that side covers are 

touching to each other. 

c) 

Location of UPS panels remain unchanged. 

d) 

In case any of the panel is not ordered its left hand side 

panel shall be shifted to ensure no gap between UPS & 

other panels i.e. in case Transformer Cubicle is not required 

the SCVS or SVR will be placed at the location of 
Transformer Cubicle. 

 

We are enclosing the typical interconnection diagram which will 
remain unchanged for all permutations & combinations of various 

options.