Emerson BACNET IP Manuel D’Utilisation

Condenser Circuit Unspecified General 

Event

One or more unspecified condenser circuit events active. See local unit display 

for further details.

Condenser Issue - Event Control

Enable/disable the activation of the [Condenser Issue] event. If set to 'disabled', 

the event will not be annunciated. This implies that the event will not be placed 

in any active event list or in any event history list.

Condenser Issue - Event Type

The event type for the [Condenser Issue] event.

Condenser Issue

Condenser is not operating within its operational parameters.

Condenser Low Noise Mode - Full Days

Days of the week selected for low noise mode full day scheduling.

Condenser Low Noise Mode - Interval 

Days

Days of the week selected for low noise mode interval scheduling.

Condenser Low Noise Mode Max Fan 

Speed

Maximum fan speed when condenser is placed in low noise mode.

Condenser Low Noise Mode Schedule 

Control

Enable/disable scheduled control of condenser low noise mode.

Condenser Low Noise Mode Start Time

The time of day at which the condenser will transition into low noise mode.

Condenser Low Noise Mode State

State of condenser low noise mode scheduler control.

Condenser Low Noise Mode Stop Time

The time of day at which the condenser will transition out of low noise mode.

Condenser Normal Mode Max Fan 

Speed

Maximum fan speed when condenser is not in low noise mode.

Condenser TVSS Issue

The condenser Transient Voltage Surge Suppressor or Surge Protection Device 

has failed.

Condenser Unit Unspecified General 

Event

One or more unspecified condenser unit events active. See local unit display for 

further details.

Condenser VFD Issue

The condenser fan Variable Frequency Drive is offline.

Cooling Capacity

Cooling capacity in use, expressed as a percentage of the maximum rated 

capacity.

Cooling Control Temperature

Temperature value being used for cooling capacity control. This value is 

compared against the temperature set point to determine the amount of cooling 

to be applied.

Cooling State

Cooling operational state.

Customer Input 1 - Event Control

Enable/disable the activation of the [Customer Input 1] event.  If set to 'disabled', 

the event will not be annunciated.  This implies that the event will not be placed 

in any active event list or in any event history list.

Customer Input 1 - Event Type

The event type for the [Customer Input 1] event.

Customer Input 1

Customer Input 1

Customer Input 2 - Event Control

Enable/disable the activation of the [Customer Input 2] event.  If set to 'disabled', 

the event will not be annunciated.  This implies that the event will not be placed 

in any active event list or in any event history list.

Customer Input 2 - Event Type

The event type for the [Customer Input 2] event.

Customer Input 2

Customer Input 2

Customer Input 3 - Event Control

Enable/disable the activation of the [Customer Input 3] event.  If set to 'disabled', 

the event will not be annunciated.  This implies that the event will not be placed 

in any active event list or in any event history list.

Customer Input 3 - Event Type

The event type for the [Customer Input 3] event.

Customer Input 3

Customer Input 3

Customer Input 4 - Event Control

Enable/disable the activation of the [Customer Input 4] event.  If set to 'disabled', 

the event will not be annunciated.  This implies that the event will not be placed 

in any active event list or in any event history list.

Customer Input 4 - Event Type

The event type for the [Customer Input 4] event.