Emerson AXP1406 Manuel D’Utilisation

Page de 148
SAM1000 Active (Virtual) Shelf Manager
FRU Information and Sensor Data Records
AXP1406/AXP1600 Subsystem IPMI Programmer’s Reference (6806800B66C)
43
   
2.3.6.11 CPLD State Sensor
The following table describes the discrete CPLD state sensor available on the physical SAM.
2.4
SAM1000 Active (Virtual) Shelf Manager
This section describes in detail all available IPMI sensors of the Active SAM1000 at IPMB 
address 0x20. The information in this section supports the SAM on both the AXP1406 and 
AXP1600 shelves. The AXP1600 FRU and sensor data is highlighted and/or marked for ease 
of use.
2.4.1
FRU Information
FRU 0 of address 0x20 corresponds to the main FRU information of the respective Physical 
SAM that is running as the Active SAM; it could be either FRU 0 of IPMB address 0xFC or FRU 
0 of IPMB address 0xFE.
There are an additional eight managed FRUs (FRUs 1 to 8) that correspond to each of the eight 
fan trays that cool the chassis. The Active SAM FRU information is addressed as FRU 254 
which is cached information from data stored as a FRU 1 in each of the PEMs (IPMB addresses 
0x66 and 0x68).
Table 2-23 Sensor No. 128 CPLD State
Feature
Raw Value/Description
Interpreted Value
Sensor Name
CPLD State
Type of Measurement
 
States of the Master and Backup 
Shelf Managers
Class
Discrete
Event/Reading Type
0x6F
Sensor-specific
Sensor Type
0xDE
OEM-reserved
Sensor Owner LUN
0x00
Entity ID
0xF0
PICMG Shelf Management 
Controller 
Entity Instance
0x60
Rearm mode
Auto
Event message control
Entire Sensor only
Assertion Event Mask (bytes 
15,16)
0xF7, 0x07
Deassertion Event Mask (bytes 
17,18)
0x00, 0x00
Discrete Reading Mask (bytes 
19, 20)
0xF7, 0x07
Supports 10 States
Reading Definition
According to Motorola XXX