Emerson SAG581126000 Manuel D’Utilisation

System Application Guide 

SAG581126000 

Spec. No. 581126000 (Model 700

NVBA

) 

Issue AD, November 23, 2009 

Page 67 of 123 

 

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy 

Systems, North America, Inc.  Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited. 

♦  Provides a battery disconnect contactor with manual control circuit. 
♦  Mounted on external rear of the Distribution Cabinet; uses no distribution row positions inside cabinet. 
♦  Includes (1) extension plate (P/N 514713) for the Distribution Cabinet ground return busbar.  Plate 

provides three pairs of clearance holes for 3/8” hardware on 1” centers.  Allows back-to-back lug landing 
for up to six lugs.  See "

under PHYSICAL SIZE INFORMATION for a dimensional drawing. 

♦  Also provides one set of Form C relay contacts for connection to customer external alarms. 

Must be installed in Main Bay (List 1) only. 

Limit one List RC per Distribution Cabinet. 

Cannot be used in a 1-bus row cabinet. 

Cannot be used if List 1 is used with List 2.  (Can be used if List 1 is used alone or with List 5.) 

Cannot be used with List 92, 93, RA, RB, RD, or RE. 

Rear access required for installation and maintenance. 

1)  Order as required. 

2)  Order battery lugs (two hole, 3/8 bolt clearance hole, 1” centers) as required Table 

. 

3/8-16 CAPTIVE NUT, 12 PLACES 

(CUSTOMER MUST PROVIDE LUG 

BOLTS AND ADDITIONAL HARDWARE.

BOLT LENGTH: 1-1/4")

REAR VIEW

BAT DISC

NORM

DISC

FRONT VIEW

(1) GROUND RETURN BUSBAR EXTENSION

PLATE PROVIDED.  SEE "DIMENSIONS OF 
BATTERY BUSBAR EXTENSION KIT, PART 

NO. 514713" FOR DIMENSIONS.

MANUAL BATTERY 

DISCONNECT SWITCH

BATTERY 

(LOAD SIDE) 

CONNECTIONS

1"

2"