Emerson LXP48F1 Manuel D’Utilisation

System Application Guide 

SAG582135000 

Spec. No. 582135000 (Model LXP48F1) 

Issue AE, January 31, 2007 

Page 31 of 43 

 

This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy 

Systems, North America, Inc.  Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited. 

♦  Category 5 Straight Through cable terminated at each end with an RJ-45 plug.  
♦  Required for MCA control bus interconnections between Distribution Cabinets, from a Distribution Cabinet to 

a Load Shed Card, or between Load Shed Cards. 

♦  Cable identification color is blue. 

Maximum combined MCA control bus cable length must not exceed 125 feet. 

1)  Order the required length from the following table. 

5 inches 

524409 

 

2 feet 

524410 

6 inches 

509070 

 

3 feet 

514639 

10 inches 

528520 

 

4 feet 

509900 

15 inches 

509071 

 

25 feet 

514640 

 

♦  MCA control bus, Power Shelf-to-Power Shelf interconnect cable. Six-inch cable terminated at each end with 

a “flat” plug.  Connects to ports located on the each shelf’s right side panel. 

♦  Cable identification color is blue. 
♦  Cables are furnished with Power Shelves as required. 

1) For 

a 

replacement cable, order P/N 521121 

 

♦  “Flat” termination plug must be installed in any unused MCA control bus port in a Main or Expansion Power 

Shelf. 

♦  Two plugs are furnished with each 

 Main Power Shelf ordered. 

1) For 

a 

replacement plug, order P/N 524651. 

 

♦  Plug must be installed in any unused RJ-45 MCA control bus port in a Distribution Cabinet DSM card or Load 

Shed Card. 

♦  One plug is furnished with each Distribution Cabinet and with each accessory Load Shed Card ordered.