Emerson 000-VA Manuel D’Utilisation

ELECTROMAGNETIC COMPATIBILITY—The Liebert GXT3 complies with the limits of 

Category C2, pursuant to IEC/EN/AS 62040-2. Operation is subject to the following conditions:

• The output cables shall be no longer than 10m (32ft).
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause 

undesired operation. Operating this device in a residential area is likely to cause harmful 

interference that users must correct at their own expense.

The Liebert GXT3 series complies with the requirements of EMC Directive 2004/108/EC and the 

published technical standards. Continued compliance requires installation in accordance with these 

instructions and use of accessories approved by Emerson®.

This is a Category C2 UPS product. In a residential environment, this product may cause 

radio interference, in which case the user may be required to take additional measures.

Operate the UPS in an indoor environment only in an ambient temperature range of 

0-40°C (32-104°F). Install it in a clean environment, free from moisture, flammable liquids, gases and 

corrosive substances.
This UPS contains no user-serviceable parts except the internal battery pack. The UPS On/Off push 

buttons do not electrically isolate internal parts. Under no circumstances attempt to gain access 

internally, due to the risk of electric shock or burn.
Do not continue to use the UPS if the front panel indications are not in accordance with these 

operating instructions or the UPS performance alters in use. Refer all faults to your dealer.
Servicing of batteries should be performed or supervised by personnel knowledgeable of batteries and 

the required precautions. Keep unauthorized personnel away from the batteries. Proper disposal of 

batteries is required. Refer to your local laws and regulations for disposal requirements.
Never block or insert any object into the ventilation holes or other openings.
DO NOT CONNECT equipment that could overload the UPS or demand DC current from the UPS, 

for example: electric drills, vacuum cleaners, laser printers, hair dryers or any appliance using half-

wave rectification.
Storing magnetic media on top of the UPS may result in data loss or corruption.
Turn Off and isolate the UPS before cleaning it. Use only a soft cloth, never liquid or aerosol cleaners.

UPS SERVICING—This UPS makes use of components dangerous for the environment (electronic 

cards, electronic components). The components removed must be taken to specialized collection and 

disposal centers.
NOTICE TO EUROPEAN UNION CUSTOMERS: DISPOSAL OF OLD APPLIANCES—This 

product has been supplied from an environmentally aware manufacturer that complies with the 

Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/CE.
The “crossed-out wheelie bin” symbol at right is placed on this product to 

encourage you to recycle wherever possible. Please be environmentally responsible 

and recycle this product through your recycling facility at its end of life. Do not 

dispose of this product as unsorted municipal waste. Follow local municipal waste 

ordinances for proper disposal provisions to reduce the environmental impact of 

waste electrical and electronic equipment (WEEE).
For information regarding the scrapping of this equipment, please browse

 (“Products session” or “Contact 

us” session) or call our worldwide technical support.

• Toll Free: 00 80011554499 
• Toll Number Based in Italy: +39 0298250222