Emerson 10-30kVA Manuel D’Utilisation

If your NX installation includes a Maintenance Bypass Cabinet, the NX must be positioned to allow 

the Maintenance Bypass Cabinet to be bolted to left side of the NX (see Figure 1). Cables from the 

Maintenance Bypass Cabinet must be brought through the bottom side of the NX for connection.
The Maintenance Bypass Cabinet must be cabled and bolted to the NX before the UPS and bypass 

cabinet are moved into their final position. Connect the input wiring to the Maintenance Bypass Cab-

inet ONLY after the units are connected and positioned.
Battery cabinets may be bolted to either side of the NX, unless used in configurations that include a 

Maintenance Bypass Cabinet. If used with a Maintenance Bypass Cabinet, battery cabinets must be 

installed on the right side of the UPS; see Figure 1 below.