Emerson 115-120 Manuel D’Utilisation
Liebert
®
BDC
™
49
5.5
Bolting Cabinets Together
1. Line up cabinets so that mounting holes are aligned.
Figure 28 Bolting Liebert
®
APM
™
to a Liebert BDC
2. Using supplied hardware, bolt the cabinets together. The bolts may be inserted from either the
UPS side or from the Liebert BDC side, whichever is more convenient.
NOTE
UPS wiring must be completed before the cabinets are bolted together.
UPS wiring must be completed before the cabinets are bolted together.
A
Hardware for bolting units is in a bag attached to
the Liebert APM. See form included with UPS.
the Liebert APM. See form included with UPS.
Place cabinets so mounting holes are aligned.
A bolt from the adjacent cabinet may be screwed into the threaded
top hole, or a bolt may be inserted through the lower hole and
screwed into the threaded hole in the adjacent cabinet.
A bolt from the adjacent cabinet may be screwed into the threaded
top hole, or a bolt may be inserted through the lower hole and
screwed into the threaded hole in the adjacent cabinet.