Emerson 48330 Manuel D’Utilisation

 

 

The equipment has multi power inputs; 

The equipment shall be installed on cement ground. 

1 Safety requirement 

Please use the same model fuse to replace the fuse in the DC Power System.     

2. Sharp object 

When moving equipment by hand, wear protective gloves to avoid injury by 

sharp object. 

3. Cable connection 

Please verify the compliance of the cable and cable label with the actual 

installation prior to cable connection. 

4. Binding the signal cables 

The signal cables should be installed separately far away from heavy current 

and high voltage cables, with distance at least 150mm.