3com 3644A Manuel D’Utilisation

 

14

When you select the ROTARY SW SET function, the LCD will display as:

                                  SW ENABLE (Def)

                                  SW DISABLE

When you select the INITIAL OUT SET function, the LCD will display as:

                                  INI. OUT SAVE

                                  INI. CLEAR (Def)

 2.3.6.5 Save voltage setting

When you select VOLT. SAVE SET function, the LCD will display as:

                                  SAVE OUT VOLT

                                  DON’T SAVE (Def)

  This function is for monitoring the output data of the power supply by using a computer.

  When you select BAUDRATE SET function, the LCD will display as:

                                  BAUDRATE=4800

                                  BAUDRATE=9600

                                  BAUDRATE=19200

                                  BAUDRATE=38400

You can select SW ENABLE (Def) to enble the rotary

switch or select SW DISABLE to disble it .

Select  INI. OUT SAVE to save the output data before

switching off the unit, select  INI. CLEAR (Def) to clear the

output data before switching off the unit.

Select  SAVE OUT VOLT. to save the last output volt-

age before switching off the unit, select "DON’T SAVE

(Def) to set the last output voltage as zero.

Users can change the communication setup by using

UP and DOWN keys or rotating the ROTARY knob, and

confirm the value by pressing “Enter” button.

BAUDRATE 4800 represents BAUDRATE=4800bps

BAUDRATE 9600 represents BAUDRATE=9600bps

BAUDRATE 19200 represents BAUDRATE=19200bps

BAUDRATE 38400 represents BAUDRATE=38400bps