AEG 1.04 Manuel D’Utilisation

 

27 

1.  This unit must be installed by qualified personnel in 

accordance with the locally applicable electrical 
regulations.  

2. The PROTECT 1.M uses fans for cooling, which 

means sufficient ventilation must be provided at the 
installation location (see also chapter 6.2: 
Installation area). 

3.  A battery system with a nominal DC voltage of 120 

Vdc is required as the external battery for the 
PROTECT 1.M. The battery capacity and the battery 
pack can be selected according to the user's 
requirements. As an option, appropriately 
preconfigurations with a wide range of capacity 
values can be purchased directly from AEG Power 
Solutions. 

4. Connection diagram: The PROTECT 1.M has two 

input modes: A single-phase input and a three-
phase input. The PROTECT 1.M detects the input 
mode and selects the corresponding operating 
mode automatically. 

a.  Connection with single-phase input