ASUS Z9PE-D8 WS Manuel D’Utilisation
4-34
Chapter 4: BIOS setup
4.5.10 APM setting
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
Restrore AC Power Loss
[Last State]
Power On By PS/2 Keyboard
[Disabled]
Power On By PS/2 Mouse
[Disabled]
Power On By PCIE
[Disabled]
Power On By Ring
[Disabled]
Power On By RTC
[Disabled]
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
Disables the PS/2 Keyboard from generating a wake event.
[Enabled]
Enables the PS/2 Keyboard to generate a wake event.
Power On By PS/2 Mouse [Disabled]
[Disabled]
Disables the PS/2 Mouse from generating a wake event.
[Enabled]
Enables the PS/2 Mouse to generate a wake event.
Power On By PCIE [Disabled]
[Disabled]
Disables the PCIE devices from generating a wake event.
[Enabled]
Enables the PCIE devices to generate a wake event.
Power On By Ring [Disabled]
[Disabled]
Disables the Ring devices from generating a wake event.
[Enabled]
Enables the Ring devices to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
Disables RTC from generating a wake event.
[Enabled]
When set to [Enabled], the items RTC Alarm Date (Days) and
Hour/Minute/Second will become user-configurable with set
values.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced