ASUS Z9PE-D8 WS Manuel D’Utilisation

ASUS Z9PE-D8 WS

5-31

5.3.4

Resetting disks to Non-RAID

Take caution before you reset a RAID volume hard disk drive to non-RAID.

Resetting a RAID volume hard disk drive deletes all internal RAID structure on

the drive.

To reset a RAID set hard disk drive:
1. From the utility main menu, select 3. Reset Disks to Non-RAID and press

<Enter>. The following screen appears.

2. Use the up/down arrow keys to select the RAID set drive(s) you want to reset,

and then press <Space> to select.

3. Press <Enter> to reset the RAID set drive(s). A confirmation message

appears.

4. Press <Y> to reset the drive(s) or press <N> to return to the utility main

menu.

Resetting RAID disk will remove its RAID structures

and revert it to a non-RAID disk.

WARNING: Resetting a disk causes all data on the disk to be lost.

(This does not apply to Recovery volumes)

Port Drive Model Serial # Size Status

0 ST3300656SS HWAS0000991753TR 279.3GB Member Disk

1 ST3300656SS 37VN00009846RAJ1 279.3GB

Member Disk

Select the disks that should be reset.

[↑↓]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete

[

RESET RAID DATA

]

5.3.5

Exiting the Intel

Rapid Storage Technology utility

To exit the utility:
1. From the utility main menu, select 4. Exit, and then press <Enter>. The

following warning message appears.

2. Press <Y> to exit or press <N> to return to the utility main menu.

Are you sure you want to exit? (Y/N):

[

CONFIRM EXIT

]