Avaya 106760804 Manuel D’Utilisation

Document No. 10-300090, Issue 1

31-3

Temperatures

Global Configuration. 

Sets the shutdown temperature for a specific component of the switch. The 
default setting for the CPU sensor is 

100°

 C. The default setting for all other 

components is 

65°

C. 

set temperature {supervisor-slot | backplane-sensor | cpu-sensor | probe} 
shutdown <temperature>

The following example sets the CPU sensor shutdown temperature to 95° 
(Celsius).

(configure)# 

P550R, P580, P880, and P882. 

{supervisor-slot | 
backplane-sensor | cpu-
sensor | probe} 

Indicates which component of the switch you are 
setting the shutdown temperature for. 

After you change the temperature settings for 
the active supervisor, you must synchronize the 
active and standby supervisors to copy the 
temperature settings to the standby supervisor.  

shutdown

Shutdown is a required parameter and indicates that 
the shutdown limit temperature is being set.

Temperature is a required parameter and when the 
switch measures this value on this component, it shuts 
itself down to prevent either inconsistent behavior or 
damage to itself or surrounding equipment. 

The command checks the entered temperature value 
and ensures that the temperature being set is not above 
127, and not below -128 degrees, the backplane sensor 
and supervisor are not below 60 and not above 127 
degrees, and the CPU sensor is not below 85 and not 
above 127 degrees.