APC ACRC501 Manuel D’Utilisation
![APC](https://files.manualsbrain.com/attachments/434134065d5c651f4d733496e262a45a75ce3ca6/common/fit/150/50/cb1a8b6f231ef4d783dd99279a1457344a0d4d6facb230ab9b5ba2f65edf/brand_logo.png)
7
InRow RC/RD/RP (600 mm) User’s Guide
Local access to the control console
You can use a local computer that connects to the cooling unit through the serial port.
1. Select a serial port at the local computer and disable any service that uses that port.
2. Use the configuration cable (APC part number 940-0103 and extension, if required, 940-1000A)
2. Use the configuration cable (APC part number 940-0103 and extension, if required, 940-1000A)
to connect the selected port of the local computer to the serial port at the cooling unit (use the
DB-9 connector on the front of the electrical panel).
DB-9 connector on the front of the electrical panel).
3. Run a terminal program (such as HyperTerminal) and configure the selected port for 9600 bps, 8
data bits, no parity, 1 stop bit, and no flow control. Save the changes.
4. Enter the user name and password for the access desired (Administrator or Device User).
Note: To access the serial port, remove the front panel and lower air filter of the cooling unit.