APC AP89XX Manuel D’Utilisation

To set up multiple global outlet groups that link to outlet groups on other Rack PDUs:

1. From the Device Manager tab, select Information from the Outlet Groups left navigation 

menu.

2. Make sure outlet groups are enabled. (See “Enable outlet groups” on page 63.)

3. Click Create Global Outlet Groups.

4. Select the checkboxes of the outlets that will be in the group and then click "Apply and Select 

Global Outlets" to select the global outlet for the group.  If there is only one outlet in the group, 
it will automatically be assigned as the global outlet.

5. To add outlets to any of the global outlet groups you created, see “Edit or delete an outlet group” .

1. From the Device Manager tab, select Information from the Outlet Groups left navigation 

menu.

2. In the Configure Group table, click on the number or name of the outlet group to edit or delete.

3. When editing an outlet group you can do any of the following:

– Rename the outlet group.

– Add or remove outlets by clicking the checkboxes to mark or unmark them.

Note: You cannot remove an outlet from an outlet group that contains only two outlets unless 
the remaining outlet is a global outlet.

4. To delete the outlet group, click Delete Outlet Group.