APC SUVTRF30KH Fascicule
Smart-UPS® VT and XR Battery Enclosure Receiving and Unpacking Guide
5
Removal of Packaging
Note
If the system has to go into storage prior to installation, do not
remove the packaging now. APC recommends to store the
system in an indoor, temperature-controlled area, free of
conductive contaminants until the time of the installation.
remove the packaging now. APC recommends to store the
system in an indoor, temperature-controlled area, free of
conductive contaminants until the time of the installation.
Remove plastic
to free the
ramp. Cut
carefully along
the edges.
to free the
ramp. Cut
carefully along
the edges.
Remove
cardboard
cover.
cardboard
cover.
Remove
corner
protection
and plastic
bag.
corner
protection
and plastic
bag.
Remove
bolts from
the two
brackets
attaching
the
Enclosure to
the pallet
(one at the
front and
one at the
back.
bolts from
the two
brackets
attaching
the
Enclosure to
the pallet
(one at the
front and
one at the
back.
Place ramp,
aligning velcro
strips on ramp
with velcro
strips on front
edge of pallet.
aligning velcro
strips on ramp
with velcro
strips on front
edge of pallet.
6
Documentation Storage
.
Two people to
roll Enclosure
from pallet.
roll Enclosure
from pallet.
Documen-
tation
storage
tation
storage
Smart-UPS® VT and XR Battery Enclosure Receiving and Unpacking Guide
7
Contact Information
If a problem occurs, phone (1)(800)800-1272 (toll-free) for U.S./Canada,
or contact our Ireland office at +353 91 70 2000 (Europe, Middle East,
Africa) or go to Web Support: support@apc.com. For country-specific
centers: go to www.apc.com/support/contact.