Samsung P50HP-2 Manuel D’Utilisation

Note

Design and specifications are subject to change without prior notice.

Class B (Information Communication equipment for residential use)

This device is registered for EMC requirements for home use (Class B). It can be used in all

areas.

(Class B equipment emits less electromagnetic waves than Class A equipment.)

PowerSaver

This PDP Display has a built-in power management system called PowerSaver. This system

saves by switching your PDP Display to low-power mode when it has not been used for a

certain amount of time. The PDP Display automatically returns to normal operation when you

press a key on the keyboard. For energy conservation, turn your PDP Display OFF when it

is not needed, or when leaving it unattended for long periods. The PowerSaver system op-

erates with a VESA DPM compliant video card installed in your computer. Use the software

utility installed on your computer to set up this feature.

PowerSaver

State

Normal Opera-

tion

Power saving

mode

Power off

Power Indicator

Blinking

Off

Power

Con-

sumption

(Typical)

MD230

P50HP,

P50HP-2

The power

consumption

may differ de-

pending on the

region. Refer

to the label on

the back of the

product.

2 watts

0 watt

P63FP,

P63FP-2

The power

consumption

may differ de-

pending on the

region. Refer

to the label on

the back of the

product.

2 watts

0 watt

Note

• The actual power consumption may be different from the indicated power consumption if

the system condition or settings are changed.

• To stop any power consumption, disconnect the power cable on the back. Be sure to

disconnect the power if you intend to stay away from home for many hours.

Preset Timing Modes

If the signal transferred from the computer is the same as the following Preset Timing Modes,

the screen will be adjusted automatically. However, if the signal differs, the screen may go

blank while the power LED is on. Refer to the video card manual and adjusts the screen as

follows.

Specifications