Panasonic PT-LC50U Manuel D’Utilisation

38

• To turn off the input signal on-screen display, please see

“

Turning off the input signal display

”.

• Only one audio system circuit is available for the AUDIO IN

jack, so if you wish to change the audio input source, you
will need to remove and insert the appropriate plugs.

• The LCD Projector is shipped from the factory with the

system format selection function set to “AUTO”. If the
correct picture is not projected when S-VIDEO/VIDEO
signal is input and it is necessary to change the input to
match the input signal, refer to “

S-VIDEO/VIDEO Signal

Format Selection

”.

• Please refer to the “

Setting of the RGB/YP

B

P

R

 Input

Signal Selection

” if you change the signal input to the

RGB/YP

B

P

R

 

connector.

• When RGB signal is input, 

please input the registered

signals found

.