Panasonic PT-DW10000E Manuel D’Utilisation

ENGLISH – 

1 set of high-density, D-sub 15p (female)

[For YP

B

P

R

 input]

Y: 1.0 V [p-p] synchronization signal included, P

B

P

R

: 0.7 V [p-p] 75 Ω

[For RGB input] 

0.7 V [p-p] 75 Ω For G-SYNC: 1.0 V [p-p] 75 Ω

HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted

VD: TTL, high-impedance, positive/negative polarity automatically adjusted

HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC.

•

1 set BNC

1.0 V [p-p] 75 Ω (Active through for Video output)

1 set Mini DIN 4p

Y 1.0 V [p-p] C 0.286 V [p-p] 75 Ω Compliant with S1 signals

1 set

DVI 1.0 compliant

HDCP (Single link only) compatible

1 set (Used for network connection)

10BASE-T/100BASE-TX

PJLink™ compatible

D-sub 9-pin (female/male), RS-232C compliant

Used for personal computer control

1 set each for M3 pin jack

Wired remote control, used for link control

D-sub 9p (female)

Used for external control

3.0 m

Molded resin

Width: 578 mm, Height : 320 mm, Depth: 643 mm

32 kg (without lens)

Ambient temperature

*3

 : 0 °C to 45 °C

Ambient humidity: 10 % to 80 % (no condensation)

3 V DC (two AA dry cells)

approx. 30 m (in front of beam receiver)

134 g (including dry cells)

Width: 51 mm, Thickness: 23 mm, Depth: 176 mm

Hanging attachment (For high ceiling): ET-PKD100H

Hanging attachment (For low ceiling):  ET-PKD100S

Projection lens: 

ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4, 

ET-D75LE5, ET-D75LE6, ET-D75LE8

DVI-D input module: 

ET-MD77DV

SD-SDI input module: 

ET-MD77SD1

HD/SD-SDI input module: 

ET-MD77SD3

Replacement Lamp Unit: 

ET-LAD10000 (single bulb), ET-LAD1000F (4 bulbs)

*1  Interlace signals are not supported even when the EDID2 mode is selected.

*2  70˝ – 300˝ for ET-D75LE5

*3  If using the projector at high altitudes (1 400-2 700 m), the ambient operating temperature should be 0°-40°C.