Panasonic PT-DZ6700 Manuel D’Utilisation

You can choose a blank screen colour for when the projector is 
idle. Press I H to select the required option.

You can switch the logo on/off that is displayed when starting 
up the projector. Press I H to select the required option. 
STARTUP LOGO will be displayed for 30 seconds.

Press the ENTER button to capture the image, and you can 
see it as a still picture while the AV equipment are continuing. 
Press the ENTER button to escape and return to the continuing 
image.

(PT-DZ6710/PT-DZ6700/PT-DW6300 only)
You can project the image and another source of image at the 
same time in double window style. 

1. Press the ENTER button.

 

Displays the main image on the left, sub image on the right.

2. Press the MENU button.

 

Displays the sub menu with current displayed signal 
information.

3. F G to select the sub image signal and press the 

ENTER button.

 

Select OFF to escape from the SIDE BY SIDE mode. To 
enter the SIDE BY SIDE mode again, select SIDE BY SIDE 
of the menu.

Displays black pattern.

Displays solid blue.

Displays user defined image.

Displays PANASONIC logo.

• Special software is required to define the LOGO1 image. 

Contact to an Authorised Service Centre.

Displays PANASONIC logo.

Deactive

Displays user defined image.

• Special software is required to define the LOGO1 image. 

Contact to an Authorised Service Centre.

• FREEZE control is available with the first image only.
• While SIDE BY SIDE is activated, ZOOM and AUTO SETUP 

are not available.

• While SIDE BY SIDE is activated, the main menu will not be 

displayed.

• The second image will apply to the value of the PICTURE 

settings of the first image except CONTRAST and 
BRIGHTNESS.

• COMPUTER and NETWORK signals will not keep the 

adjusted aspect ratio.

• Some combination of the signals are not available. See “SIDE