Panasonic PT-CX301RE Manuel D’Utilisation

Page de 78
Troubleshooting
66
 - ENGLISH
Maintenance
Problem
Cause
Reference 
page
Messages displays
 Dust Filter Reminder Message: 
 
z
 
 
 
 
 
 This message displays when the projector reached the timer set in 
the [Filter Reminder (Hour)]. In this case, please clean the air filters or 
replace them.
59
 Lamp Warning Message: 
 
z
 The lamp has reached its end of life, please replace it as soon as 
possible.
62
 Fan Locked Warning Message: 
 
z
 
 This shows the fan has stopped during projection and the power will be 
shut off soon. Unplug the power cord from the outlet and contact your 
dealer for details.
58
 Temperature Fail Message :  
 
z
 
 The internal temperature is too high and the power will be shut off soon, 
please confirm the display items.
Attention
Please contact your dealer if the projector still can not be operated normally after following the instructions above. 
 
z
Note
The <AUTO ADJ.> operation may not optimize the image position or the resolution, depending on the input signal format or 
 
z
the image contents. In this case, switch to a different image and execute <AUTO ADJ.> again.