Panasonic PT-EX12KU Manuel D’Utilisation

■

■[PIN code change]

Changes the PIN code.

■

z

The PIN code input screen is displayed.

2)  Press ▲▼◀▶ or the number (<0> - 

3)  Press ▲▼◀▶ to select [Set].
4)  Press the <ENTER> button.

■

z

If the PIN code is accepted, the new PIN code 

is displayed on the screen.

5)  Press ▲▼◀▶ or the number (<0> - 

■

z

If the PIN code is accepted, the projector 

returns to the sub menu 2.

■

z

To re-enter a number, press ◀▶ to select the digit 

to re-enter, then press ▲▼ or the number (<0> - 

<9>) buttons to re-select the number.

■

z

Move the cursor to [Cancel] and press the 

<ENTER> button to return to the sub menu 2.

Sets the projector ID (1 to 64) for the RS-232C serial 

communication.

1)  Press ▲▼ to select [Projector ID].
2)  Press the <ENTER> button.
3)  Press ▲▼ to switch the setting.

■

z

The factory default setting is [All].

Makes projector accept operations 

regardless of any ID number 

specified by the remote control or 

PC.

Sets ID numbers from 1 - 64 to the 

projector.

Sets the shutter function.

1)  Press ▲▼ to select [Shutter].
2)  Press the <ENTER> button.

■

z

The sub menu 2 is displayed.

3)  Press ▲▼ to select.

■

■[Protection]

Locks the button to prevent shutter operations.

2)  Press ▲▼ to switch the setting.

■

z

The setting will change as follows each time 

you press the button.

Protection is off.

Operation can be made from both 

remote control and projector.
Locks operations from the remote 

control.
Locks operations from the control 

panel.
Locks operations from both the 

remote control and the control panel.