Polycom 3725-24004-001/A Manuel D’Utilisation

 Using the Polycom PowerCam Presenter

2 - 3

Keep in mind that the 

 Tight,  

Wide,  

Left, and 

 Right button 

settings described here are merely guidelines, and that you can set and change 

the settings to best suit your needs. For more information, refer to 

 on page 

.

When the message 

Remote control batteries are low

 appears on the screen, you 

need to replace the batteries.

The  

Menu button on the remote control gives you access to the user 

settings. These settings enable you to configure and calibrate the camera, set 

LAN properties, and specify video output settings.

The Camera Settings screen lets you specify the settings for the input signal, 

backlight compensation, camera direction, and the camera tracking area.

You may need to set or change these camera settings depending on your 

preferences and on the environment in which you use your PowerCam 

Presenter.

Press  

Menu on the remote control.

Select Camera Settings from the PowerCam Presenter screen.

Configure these settings:

Specifies your camera’s input signal:
• Select S-Video if you connect your camera to the 

PowerCam Presenter controller using the 
S-video connector on the camera.

• Select Composite if you connect your camera to 

the PowerCam Presenter controller using the 
composite connector on the camera.