Polycom 3725-24004-001/A Manuel D’Utilisation

User’s Guide for the Polycom PowerCam Presenter

2 - 14

¾

Press one of the Presenter View buttons:
—

 Tight zooms in more closely on the presenter.

 Wide zooms out further away from the presenter.

 Left moves the camera to the left of the presenter.

 Right moves the camera to the right of the presenter.

Remember that these settings are merely guidelines, and that you can set and 

change the Presenter View buttons to whatever you need.

When you use automatic camera tracking, you typically want the camera to 

automatically zoom in and out on the presenter. At other times, however, you 

may want a fixed zoom so that the zoom remains the same whether the 

presenter moves closer to or away from the camera. In such cases, you can 

disable automatic zooming.

¾

Press  

Auto Zoom on the remote control.

If automatic zooming was enabled, it becomes disabled; if it was disabled, 

it becomes enabled. The message 

Auto zoom is ON

 or 

Auto zoom is OFF

 

momentarily appears on the screen to let you know whether automatic 

zooming is enabled or disabled.

If the camera does not accurately frame the presenter when automatically zooming, 
you may need to calibrate the camera or adjust the framing. For more information, 
refer to the “The camera is not accurately framing you” symptom on page 

.