Optoma Technology XX152 N Manuel D’Utilisation

English

3

When the lamp 

reaches the end 

of its life, the pro-

jector will not turn 

back on until the 

lamp module has 

been replaced. To 

replace the lamp, 

follow the proce-

dures listed under 

“Replacing the 

Lamp” section.



■ 

Warning-

Do not look into the projector’s lens when the 

lamp is on. The bright light may hurt your eyes.

■ 

Warning-

To reduce the risk of fi re or electric shock, do 

not expose this projector to rain or moisture.

■ 

Warning-

Please do not open or disassemble the projec-

tor as this may cause electric shock.

■ 

Warning-

When replacing the lamp, please allow the unit 

to cool down.

■ 

Warning-

This projector will detect the life of the lamp 

itself.  Please be sure to change the lamp when 

it shows warning messages.

■ 

Warning-

Reset the “Lamp Reset” function from the on-

screen display “System|Lamp Setting” menu 

after replacing the lamp module.

■ 

Warning-

When switching the projector off, please ensure 

the cooling cycle has been completed before 

disconnecting power. Allow 90 seconds for the 

projector to cool down.

■ 

Warning-

Do not use lens cap when projector is in opera-

tion.

■ 

Warning-

When the lamp is approaching to the end of 

its life time, the message “Replacement sug-

gested” will show on the screen. Please contact 

your local reseller or service center to change 

the lamp as soon as possible.

N

OTE