Philips PT-LB51SU Manuel D’Utilisation

You can reset most of the customised settings 
to the factory defaults by pressing DEFAULT 
button of the Remote control. Display the 
required sub menu or the menu items and 
press the DEFAULT button again.

You can project an image in split 2 windows 
as an INDEX-WINDOW, one is frozen, stored 
in memory and displayed on the screen’s left 
side, while the display of subsequent images 
continues on the right.
To escape from the INDEX-WINDOW, press 
the RETURN button.

Q

In default, the frozen image is displayed on the left 
and the subsequent image is displayed on the 
right. Press I H to switch the position.

Q

Press F G to switch and cycle through in 3 size.

Q

While in INDEX-WINDOW mode, press ENTER to 
capture a new image and the frozen image window 
will be updated in a while.

• Some menu items are not available to reset by pressing 

the DEFAULT button. Adjust each menu items 
manually.

• If you change the window size, the aspect ratio of the 

image is changed and becomes vertically elongated.

• This operation can also be carried out using the 

INDEX-WINDOW command in the MAIN MENU. 
See “INDEX-WINDOW” on page 36.

• When FUNCTION BUTTON is set to “INDEX 

WINDOW” (see “FUNCTION BUTTON” on page 34), 
the INDEX-WINDOW operation can also be carried out 
by pressing the FUNCTION button at the front of the 
projector.