Philips PPX2330 Manuel D’Utilisation

A tripod accessory is available if you want to elevate the
device.

Connect the USB plug to a computer, to charge the bat-
tery. Alternatively you may connect the USB plug to the
power adapter (not included) (see also chapter Com-patible Power Supply, page 23).

1 Switch the device on using the on/off switch on the

side.

2 Turn the device towards a suitable projection sur-

face or wall. Note that the distance to the projection
surface must be a minimum of 0.3 meters and a max-
imum of 2.1 meters. Make sure the projector is in a
secure position.

3 Use the focus wheel on the top to adjust the image

sharpness.

4 Select the desired menu language using ¡/¢.

5 Confirm with à.

Check whether the mains voltage of the
power supply matches the mains voltage avail-
able at the setup location.

The device has already been installed. In
order to change the menu language, pro-
ceed as follows:
1 Use the navigation keys to select Set-

tings.

2 Confirm with à.
3 Select with ¡/¢ Language.
4 Confirm with à.
5 Select the desired language with ¡/¢.
6 Confirm with à.
7 Exit with ¿.