Mitsubishi Electronics XL6600U Manuel D’Utilisation

EN-5

Start the Projector-Control Device Installer.
•  Select [Start] - [All Programs] - [Projector] - 

[Projector-Control Device Installer] (in the case of 
Windows

®

 XP). 

Click the Search button.

• 

Projector is recognized.

(Note)
When projector isn’t recognized, check the following. 

• 

The fi rewall function has been disabled. (When it 
has been enabled, search may not be conducted.) 

• 

The personal computer and the projector are on 
the same network. (For preventing unauthorized 
access.)

• 

More than one Projector-Control Device Installer 
isn’t running. 

Select a projector by clicking the line showing the 
projector and click the Assign IP button. 

(Don’t select this side. When you 
execute IP assignment with this side 
selected, it may become impossible to 
control the projector.) 

The Assign IP Address screen appears. 

Before setting the IP address, check that the projector has been LAN-networked and turn on the main power of the 
projector. 

• 

When using multiple projectors, connect and configure them one by one. If you turn on the powers of the 
projectors that are connected but not yet confi gured at the same time, they may not be recognized.

• 

For automatic IP address setting by the DHCP server, go to page 6. For IP address setting without using the 
DHCP server, go to page 7.