RCA WP4UWR Fascicule

Page de 1
USB wall plate charger
WP4UWR/WP4UAR User’s Guide
The RCA USB wall plate charger turns any standard home dual AC 
power outlet into a USB outlet in seconds, with fast, full-speed charging 
for smartphones or tablets.
The 4 USB charging outlets support a wide range of USB-powered 
portable devices. The outlets labeled 2.1 are optimized for devices that 
require extra current, such as tablets. These outlets can output 2.1 Amps 
of power.
The bottom 2.1 outlet is switchable, to support tablet products with 
different charging circuitries. If you notice that your tablet is not 
charging correctly on the top 2.1 outlet, follow the instructions below to 
charge it on the switchable 2.1 outlet.
All four outlets support regular USB-powered devices, such as most 
smartphones.
Using the Switchable 2.1 USB Outlet
The bottom 2.1 USB outlet 
is switchable to support 
the different charging 
circuitries used by different 
tablet manufacturers. This 
outlet can charge smart 
phones with non-standard 
USB as well as tablets. 
Before using this outlet, make sure you have the switch below this outlet 
set to the right position for your device, as shown here. You must have it 
set BEFORE you plug in your device. As a rule of thumb, leave this switch 
in the B position unless you have an Apple (A) or Samsung (C) product.
 Notes: 
• 
These are general guidelines for setting the switch—they might not work for all 
models of all brands listed. If your device is still not charging correctly, unplug it 
and try a different setting.
• 
If your device does not start charging after plugged in, remove the USB cable 
from the outlet. Set the switch to a different position and reinsert the USB cable 
to the outlet. You may need to try all three positions.
A: Optimized for iPad and other Apple 
products (except for iPod Classic and nano)
2.1
B: Works for most 
other devices
C: Optimized for 
Samsung tablets 
©2012 Audiovox Accessories Corporation
A wholly-owned subsidiary of VOXX International Corporation 
Indianapolis, IN
WP4UWR/WP4UAR US QSG 00
Limited Lifetime Warranty
Audiovox Accessories Corporation (the “Company”) warrants to you the original retail 
purchaser of this product that should it, under normal use and conditions, be proven 
defective in material or workmanship during its lifetime while you own it, such defect(s) 
will be repaired or replaced (at the Company’s option) without charge for parts and 
repair labor.To obtain repair or replacement within the terms of this Warranty, the 
product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), 
specifi cation of defect(s), transportation prepaid, to the Company at the address shown 
below. Do not return this product to the Retailer.This Warranty does not cover product 
purchased, serviced or used outside the United States or Canada.This Warranty is 
not transferable and does not extend to costs incurred for installation, removal or 
reinstallation of the product. This Warranty does not apply if in the Company’s opinion, 
the product has been damaged through alteration, improper installation, mishandling, 
misuse, neglect, or accident. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS 
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, 
IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE PURCHASE PRICE 
PAID BY PURCHASER FOR THE PRODUCT.This Warranty is in lieu of all other express 
warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED 
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL 
BE LIMITED TO DURATION OF THIS WARRANTY. IN NO CASE SHALL THE COMPANY 
BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER. 
No person or representative is authorized to assume for the Company any liability 
other than expressed herein in connection with the sale of this product.Some states/
provinces do not allow limitations on how long an implied warranty lasts or the 
exclusion or limitation of incidental or consequential damage so the above limitations 
or exclusions may not apply to you. This Warranty gives you specifi c legal rights and 
you may also have other rights which vary from state/province to state/province.
U.S.A.: Audiovox Return Center, 150 Marcus Blvd., Hauppauge, 
New York  11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16, 
Mississauga, Ontario  L5T 3A5
• 
The switch controls the bottom 2.1 outlet only. It does not control the other 
charging outlets.
• 
When this charger is providing maximum charging power (like with two fully 
discharged tablets, four fully discharged phones), it is not unusual for the 
outside case of the wall plate charger to become warm to the touch.  This is 
normal. You should not hold on to the case when it is warm, although it is safe 
to touch.
Note about tablet charging:
This wall plate charger has 2 banks of 2 USB charging outlets each. Each bank 
provides enough power for full-speed charging for 1 tablet or 2 smartphones. In 
other words, the wall plate charger can provide full-speed charging for up to 2 
tablets or 4 smartphones at the same time. For full-speed charging of tablets, you 
should charge it by itself in its bank--you can still use the other bank for either a 
single tablet or 2 smartphones, as shown here.
2.1
2.1
2.1
2.1
2.1
2.1
1 tablet and 2 smartphones
2 tablets
4 smartphones
Cargador de placa para pared 
WP4UWR/WP4UAR Guía del Usuario
El cargador de placa para pared USB RCA convierte cualquier toma 
de pared CA dual doméstica estándar en una toma USB en segundos, 
proporcionando una carga rápida a toda velocidad para teléfonos 
inteligentes o tabletas.
Las 4 tomas de carga USB soportan una amplia variedad de dispositivos 
portátiles alimentados vía USB. Las tomas etiquetadas 2.1 están 
optimizadas para dispositivos que requieran corriente extra, tales como 
tabletas. Éstas tomas pueden dar salida a 2.1 Amperes de corriente.
La tabla 2.1 inferior es conmutable, para dar soporte a productos de 
tabletas con diferentes circuitos de carga. Si usted nota que su tableta 
no está cargando correctamente en la toma 2.1 superior, siga las 
instrucciones a continuación para cargarla en la toma 2.1 conmutable. 
Las cuatro tomas soportan dispositivos alimentados vía USB regulares, 
tales como la mayor parte de los teléfonos inteligentes.
Uso de la toma USB 2.1 conmutable
La toma USB 2.1 inferior es 
conmutable para soportar 
los diferentes circuitos de 
carga usados por diferentes 
fabricantes de tabletas. 
Esta toma puede cargar 
teléfonos inteligentes con 
USB no estándar así como 
tabletas. Antes de usar esta 
toma, asegúrese de que tenga el interruptor bajo esta toma establecido 
en la posición correcta para su dispositivo, tal como se muestra aquí. 
Esto debe ser efectuado ANTES de conectar su dispositivo. Como regla 
general, deje este interruptor en la posición B a menos que usted tenga 
un producto de la marca Apple (A) o Samsung (C).
 Notas: 
• 
Estos son lineamientos generales para confi gurar el interruptor - pueden no 
funcionar para todos los modelos de todas las marcas listadas. Si su dispositivo 
aún no está cargando correctamente, desconéctelo e intente con una 
confi guración diferente.
• 
Si su dispositivo no comienza a cargar después de ser conectado, retire el 
cable USB de la toma. Confi gure el interruptor para una posición diferente y 
reinserte el cable USB en la toma. Puede ser que usted necesite intentar con 
las tres posiciones.
• 
El interruptor controla solamente la toma 2.1 inferior. No ejerce control sobre 
las otras tomas de carga.
• 
Cuando este cargador esté suministrando máxima potencia de carga 
(como con dos tabletas completamente descargadas, cuatro teléfonos 
completamente descargados), no es inusual que el estuche exterior del 
cargador de placa de pared se caliente al toque. Esto es normal. Usted no 
deberá sostener el estuche cuando esté caliente, aunque sea seguro tocarlo.
Nota acerca de la carga de una tableta:
Este cargador de placa de pared tiene 2 bancos de carga USB cada uno. Cada 
banco proporciona sufi ciente corriente para carga a velocidad total para 1 tableta 
o 2 teléfonos inteligentes. En otras palabras, el cargador de placa de pared puede 
suministrar carga a toda velocidad hasta para 2 tabletas o 4 teléfonos inteligentes 
al mismo tiempo. Para carga de máxima velocidad de tableta, usted deberá 
cargarla en su banco-, y todavía puede usar el otro banco ya sea para una sola 
tableta o 2 teléfonos inteligentes, como se muestra aquí.
2.1
2.1
2.1
2.1
2.1
2.1
1 tableta y 2 teléfonos 
inteligentes
2 tabletas
4 teléfonos inteligentes
A: Optimized for iPad and other Apple 
products (except for iPod Classic and nano)
2.1
B: Works for most 
other devices
C: Optimized for 
Samsung tablets 
A: Optimizada para iPad y otros productos 
Apple (excepto iPod Classic y nano)
C: Optimizada para 
tabletas Samsung
B: Funciona para la 
mayoría de los otros 
dispositivos.