ADC MM701G Manuel D’Utilisation
Chapter 4: Configuring the WAN
MM701G and MM702G User Manual
29
Set Up an RFC 1483 Routed Session
You selected
RFC 1483 routed
from the
WAN Configuration
page to display the following page.
1
Configure the following parameters for each session:
Session Name
Enter a unique, descriptive identifier for the session. This name can have a maximum
of 32 characters.
of 32 characters.
Virtual Path ID (VPI)
Enter the value (from 0 to 4,095) provided by the service provider. The number
identifies the virtual path that transports ATM cells between the modem and the
service provider. This value must match the virtual path identification (VPI) value
the service provider uses for this connection.
identifies the virtual path that transports ATM cells between the modem and the
service provider. This value must match the virtual path identification (VPI) value
the service provider uses for this connection.
Virtual Channel ID (VCI)
Enter the value (from 32 to 65,535) provided by the service provider. The number
identifies the virtual channel for this session that transports ATM cells between the
modem and the service provider. This value must match the virtual channel
identification (VCI) value the service provider uses for this connection.
identifies the virtual channel for this session that transports ATM cells between the
modem and the service provider. This value must match the virtual channel
identification (VCI) value the service provider uses for this connection.