Abocom FE2000 Manuel D’Utilisation
Hardware Installation
This chapter describes how to install the CardBus
10/100M dual-speed PC Card in your notebook
computer and connect it to network. It’s referred to “the
PC Card” in this manual.
The PC Card could connect to either 100Mbps Fast
Ethernet or 10Mbps Ethernet over unshielded twisted
pair (UTP) calbe. The PC Card has the ability of
automatic sensing and operating on either speed
without manual recofiguration.
After finishing the installation of PC Card into your
Notebook, please refer to Software Installation on
how to install network drivers using menu driven
installation utility.
10/100M dual-speed PC Card in your notebook
computer and connect it to network. It’s referred to “the
PC Card” in this manual.
The PC Card could connect to either 100Mbps Fast
Ethernet or 10Mbps Ethernet over unshielded twisted
pair (UTP) calbe. The PC Card has the ability of
automatic sensing and operating on either speed
without manual recofiguration.
After finishing the installation of PC Card into your
Notebook, please refer to Software Installation on
how to install network drivers using menu driven
installation utility.
Inserting the CardBus Dual-Speed PC Card
1. Hold the CardBus PC Card with wide connector
toward the slot and the brand lable facing
upward.
upward.
2. Insert the CardBus PC Card and push it firmly
into the bottom. ( Please see the figuer on the next
page for reference)
page for reference)
- 1 -