ADC MM702G Manuel D’Utilisation

Install the flat gray console cable between the modem Console port and your PC as shown 
below, using the DB-9 port adapter on the PC, if required.

You can access the command-line interface through the direct connection to the modem console 
port and using a terminal emulation program. You can also access the command-line interface 
using a telnet session. To use a telnet session, you must have IP access to the modem either 
through the 10Base-T LAN port (LAN-side access) or through an IP address assigned to a WAN 
session (WAN-side access). The following sections provide instructions for setting up both 
types of command-line interface access.

MD

I

MDI-X

10B

AS

E-T

CO

NS

OL

E

Console port

Grey cable

PC

9-pin COM
port

Adapter

M0326-A