ADC MM702G Manuel D’Utilisation

LAN IP Address

Enter 

 then type the IP address provided by your LAN administrator. Use the 

following criteria to determine if or how the LAN IP address will be changed:

Enter an IP address for the LAN (10Base-T) port provided by the LAN 
administrator if you are not implementing a 10.0.0.0 subnet.

Use the default IP address for the LAN port which is 10.0.0.1. If you choose to use 
the default IP address, ensure that the devices on your LAN are on the same subnet 
as this modem LAN port.

If you want a DHCP server on your LAN to automatically provide the modem 
LAN port IP address, select 

 for the DHCP configuration (configuration step 

). 

LAN Subnet Mask

Enter 

 then type the LAN subnet mask provided by your LAN administrator. Use the 

following criteria to determine if or how the LAN subnet mask will be changed:

Enter the subnet mask for the LAN (10Base-T) port provided by the LAN 
administrator. 

Use the default subnet mask for the LAN port which is 255.255.255.0. If you 
choose to use the default subnet mask, ensure that it allows devices on your LAN 
to access the modem LAN port.

If you want a DHCP server on your LAN to automatically provide the subnet mask 
in addition to the IP address, select 

for the DHCP configuration 

(configuration step is on 

System Default Gateway

Enter 

 then type the IP address of the DHCP default gateway that is provided by the 

LAN administrator for devices on the LAN. After you configure this IP address, the 
modem provides this IP address as a default DHCP gateway to requesting DHCP 
clients (such as PCs) on the LAN. If there are no gateways on the LAN, then the 
modem LAN port IP address can be assigned as the gateway.

Ethernet Full Duplex

Enter 

then select 

 for 

if you want to set the modem LAN port to full-duplex 

transmission. Select 

 for 

 (default) if you want to set the modem LAN port to 

half-duplex.