ADC MM702G Manuel D’Utilisation

—The modem functions as a DHCP server and can serve IP addresses, a DHCP 

gateway, and a DNS server IP address to devices on your LAN. When the modem 
DHCP server is enabled, then LAN clients (such as PCs) must have their Internet 
protocol (TCP/IP) set to 

 (see 

 for an example 

of where to select this option).

Select 

, then click 

 to access the following 

 page 

(DHCP Server cannot be enabled when the LAN protocol is in bridge mode). 

Configure the following parameters when DHCP server is enabled for the modem:

DHCP Range Low

The lowest IP address value that the modem can serve when configured as a 

. A maximum of 20 IP addresses can be served by the modem. 

This IP address value is provided by your LAN administrator and must be on 
the same subnet as the modem LAN port. 

DHCP Range High

The highest IP address value that the modem can serve when configured as a 

. A maximum of 20 IP addresses can be served by the modem. 

This IP address value is provided by your LAN administrator and must be on 
the same subnet as the modem LAN port.