ADC MM702G Manuel D’Utilisation

These configuration parameters affect system functions for the modem. Other system 
parameters used to manage or troubleshoot the modem (updating modem software, for 
example) are in 

Determine the following before changing system parameters:

❑

If secured management access is required for the modem, add users and assign one of three 
predefined security levels: Default, Engineer, or Super User.

❑

If SNMP authentication is required, add SNMP communities with either read or write 
access.

❑

Add the IP address for the network default router through which packets are forwarded.

❑

If static routes will be used to predetermined destinations, identify the destination host or 
network IP address. Also, identify the next hop gateway IP address for devices on your 
LAN (for example, the modem LAN port IP address).

❑

If spanning tree protocol is required, based on one or both of the following conditions, then 
enable it:

RFC 1483-Bridge protocol is used for any session or for the 10Base-T port (LAN)

there are multiple bridging devices on a LAN with more than one physical path 
connecting them and you want to prevent loops

Otherwise, disable spanning tree protocol.