ADC MM702G Manuel D’Utilisation
Add Static Route Entries
46
MM701G and MM702G User Manual
2
To add a new static route, do the following:
a
On the
Static Routes
page, click
Create a new IP route
. The following dialog is displayed.
b
Enter the following information for the static route.
Destination
The IP address for the destination network, subnet, or host to which the packets
are directed. Use 0.0.0.0 as the destination IP address for a default route.
are directed. Use 0.0.0.0 as the destination IP address for a default route.
Gateway
The IP address for the next hop in your network to which the packets are
forwarded. For example, if your network is connected either directly or through a
hub to the LAN port of the modem, then the LAN port IP address can be the next
hop. Or, a WAN port can be the next hop for traffic.
forwarded. For example, if your network is connected either directly or through a
hub to the LAN port of the modem, then the LAN port IP address can be the next
hop. Or, a WAN port can be the next hop for traffic.
Netmask
The network mask defining the route and access for the destination IP address.