Toshiba HD-XE1 Manuel D’Utilisation

6

Chapter

6

 

To turn on or off a function that increases dialog volume of a 

DVD video disc playback.

This function is activated.

This function is disabled.

  This function is effective only in playback of HD DVD or 

DVD video discs recorded in Dolby Digital or Dolby Digital 
Plus.

  The effect level of this function vary depending on the disc.

To select various parameters for the analog 5.1 channel 

output.

When a 5.1 channel surround system is connected to this 

player.

Go to the next step (see below) for detailed selections.

When a 2 channel stereo system is connected to this 

player.

Set the speaker sizes, distance to each speaker and the 

crossover frequency.

1  Select a speaker by pressing   /  /  

/   buttons, and 

press OK button.

2  Select the size by pressing   /   buttons, and press OK 

button.

Small: 

Select if the speaker cannot output low 

frequency.

Large: 

Select if the speaker can output low 

frequency.

Small: 

Select if the speaker cannot output low      

frequency.

Large: 

Select if the speaker can output low           

frequency.

None: 

When the speaker is not connected.

Use: 

When a subwoofer is connected.

Don’t Use:  When a subwoofer is not connected.

Low frequency under which you set here will be of a 

subwoofer. Select one from 80 Hz/100 Hz/120 Hz.

Select a distance to each speaker from the listening 

position.

  If you select “Clear” and press OK button, your 

selection is canceled and the previous menu returns.

  If you select “End” and press OK button, your selection 

is saved and the setting fi nishes.

3  Select “Next” by pressing   /  /   /   buttons, and 

press OK button.

  The next screen appears.

4  Select “Automatic Test Tone” by pressing   /  /   /   

buttons, and press OK button.

  A test signal is sent to each speaker. Adjust each of the 

volumes by pressing   /  , selecting speakers by   /  , 

so that each speaker can sound at the same volume.

  For further adjustment, check the channel balance on 

the amplifi er.

5  When complete, select “OK” and press OK button.

HD-XE1_06_E   56

HD-XE1_06_E   56

06.12.6   3:14:57 PM

06.12.6   3:14:57 PM