Cabletron Systems SEHI100TX- Manuel D’Utilisation

Chapter 7: Local Management

The ENABLE PORT command lets the user enable the selected port. The 
user must first use the PORT command to select the desired port.

Use the following steps to set the PORT ENABLE command:

1. Use the arrow keys to highlight the ENABLE PORT command at the 

bottom of the screen.

2. Press ENTER. The corresponding port is enabled and the Port Admin 

Status field is updated.

The DISABLE PORT command lets the user disable the port selected in 
the PORT command. The user must first use the PORT command to select 
the desired port.

Use the following steps to set the DISABLE PORT command:

1. Use the arrow keys to highlight the DISABLE PORT command at the 

bottom of the screen.

2. Press ENTER. The corresponding port is enabled and the Port Admin 

Status field is updated.

Use the following steps to exit the Device Statistics screen and return to 
the Feature Selection screen:

1. Use the arrow keys to highlight the RETURN command at the bottom 

of the screen.

2. Press ENTER. The Feature Selection screen appears.

SEHI Book  Page 24  Wednesday, May 15, 1996  10:42 AM