Cabletron Systems DLE22-MA Manuel D’Utilisation
Chapter 5: Local Management
5-50
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
5.15.13 Clearing NVRAM
Clearing NVRAM allows the user to clear all user-entered parameters,
such as IP address and Community Names from NVRAM.
such as IP address and Community Names from NVRAM.
Clear NVRAM as follows:
1.
Use the arrow keys to highlight the Clear NVRAM field.
2.
Use the SPACE bar to toggle the field to YES.
3.
Use the arrow keys to highlight SAVE at the bottom of the screen.
4.
Press ENTER. The warning shown in Figure 5-20 is displayed.
Figure 5-20
Clear NVRAM Warning Screen
5.
Use the arrow keys to highlight YES and press ENTER. The message
“CLEARING NVRAM. REBOOT IN PROGRESS...” displays.
“CLEARING NVRAM. REBOOT IN PROGRESS...” displays.
!
Clearing NVRAM will result in the loss of all user-entered
parameters. Do not proceed unless this procedure is
completely understood.
parameters. Do not proceed unless this procedure is
completely understood.
WARNING
LKG-10850-98F
YOU HAVE ELECTED TO CLEAR NVRAM. THIS WILL CLEAR
ALL SYSTEM DEFAULTS INCLUDING BUT NOT LIMITED TO
IP ADDRESS, INTERFACE CONFIGURATION, AND COM PORT
CONFIGURATION, THEN RESET THE BOARD.
ARE YOU SURE YOU WANT TO CLEAR NVRAM?
YES
NO