Cabletron Systems DLE22-MA Manuel D’Utilisation
Chapter 5: Local Management
5-30
DLE22-MA,DLE32-MA,DLE23-MA and DLE33-MA User’s Guide
Source Port [
n
] (Selectable)
Allows a selected port [n] to be configured as a source port.
Destination Module [
n
] (Selectable)
Allows a selected module [n] to be configured as a destination module.
Destination Port [
n
] (Selectable)
Allows a selected port [n] to be configured as a destination port.
Errors (Toggle)
Allows the user to configure the source modules and ports to either send
errored frames to selected destination modules and ports ([ON] option),
or to drop errored frames, and send only valid traffic to the destination
modules and ports ([OFF] option). The default setting of this field is
[ON].
errored frames to selected destination modules and ports ([ON] option),
or to drop errored frames, and send only valid traffic to the destination
modules and ports ([OFF] option). The default setting of this field is
[ON].
Status (Toggle)
Allows the user to add or delete the source/destination modules and ports
selected in the Source/Destination Modules and ports fields.
selected in the Source/Destination Modules and ports fields.
5.11.1
Displaying the Source and Destination Entries
There can be more than one Port Redirect Function screen depending on
the number of port redirect entries. Each screen displays up to ten port
redirect entries. If there is more than one screen of redirect entries, the
NEXT and/or PREVIOUS command is displayed at the bottom of the
screen, allowing the user to navigate to the next or previous screen.
the number of port redirect entries. Each screen displays up to ten port
redirect entries. If there is more than one screen of redirect entries, the
NEXT and/or PREVIOUS command is displayed at the bottom of the
screen, allowing the user to navigate to the next or previous screen.
To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER and the next screen of entries is displayed.
ENTER and the next screen of entries is displayed.
To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries in the previous screen.
PREVIOUS. Press ENTER to view the entries in the previous screen.
5.11.2
Changing Source and Destination Ports
Add or delete source/destination module and port entries as follows:
1.
Use the arrow keys to highlight the Source Module field.
2.
Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the module number displayed in the brackets [n] until the
appropriate module number is displayed.
or decrement the module number displayed in the brackets [n] until the
appropriate module number is displayed.