ICP DAS USA SAGP-845EV Manuel D’Utilisation

This chapter discusses the setup program in the BIOS.  It will give users 
a step-by-step guidance to configure the system.  The user-defined 
configuration is then stored in the battery-backed CMOS RAM, which 
retains the customized information while the power is off. 

The BIOS is immediately active when the computer has been turned on. 
While the BIOS is in control, the setup program will be activated by one of 
the following ways: 
1.  Press <Del> immediately after switching the system on, or 
2.  Press <Del> when the following message appears at the bottom of 

the screen during POST (Power On Self-Test): 
 
Press DEL to enter SETUP 

 
If the message passes before the user responds and the user still wants 
to enter Setup, please turn off the power first and then switch it back on 
to restart the system; or simply press the "RESET" button on the system 
case to reboot the system.  The alternative way to restart the system is  
simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.  If the user do 
not press the keys at the right timing and the system does not boot, an 
error message will be displayed and the user will be prompted to...