Kingston Technology KND2410TX Manuel D’Utilisation
Introduction 1
KND2410TX User’s Guide - Rev. A01
Kingston Technology Company
Introduction
Intended Audience: This manual assumes that the user has a general working knowledge
of networking principles and is familiar with network systems in general.
of networking principles and is familiar with network systems in general.
Congratulations on the purchase of your Kingston Fast EtheRx Stackable 10/100TX
Rack-Mountable Dual Speed hub. There are three models available: KND810TX (8-port
model), KND1610TX (16-port model) KND2410TX (24-port model). The KND810TX
and KND1610TX can be used on a desktop or standard 19” rack-mount installation,
using the extended mounting brackets provided with the unit. The KND2410TX is a full
19” rack-mount unit. The Fast EtheRx Stackable 10/100TX Dual-Speed hubs conform to
IEEE802.3u 100BASE-TX, IEEE802.3i 10BASE-T, and IEEE802.3 CSMA/CD
standards. Using any combination of the dual-speed hubs, you can stack up to a
maximum of four hubs.
For ease of installation, the Fast EtheRx Stackable Dual Speed hubs offer eight (8),
sixteen (16), or twenty-four (24) UTP ports that auto-negotiate 10/100Mbps operation
and an uplink port that allows the last UTP port on the hub to support both crossover and
straight-through cabling. By default port 7 & 8 (KND810TX & KND1610TX) or port 23
& 24 (KND2410TX) are set for auto-negotiation but can be manually configured for
either 10Mbps or 100Mbps operation, using the dip switches located on the back of the
unit. Ideal for inter-connecting 10BASE-T Ethernet networks with 100BASE-TX Fast
Ethernet networks, the Fast EtheRx Dual-speed hubs can also be used as simple stand-
alone 10BASE-T or 100BASE-TX repeaters. For easy trouble-shooting, the front panel
includes a variety of diagnostic LEDs such as Power, Collision for 10Mbps and
100Mbps, 100TX, Link, and Activity status.
Rack-Mountable Dual Speed hub. There are three models available: KND810TX (8-port
model), KND1610TX (16-port model) KND2410TX (24-port model). The KND810TX
and KND1610TX can be used on a desktop or standard 19” rack-mount installation,
using the extended mounting brackets provided with the unit. The KND2410TX is a full
19” rack-mount unit. The Fast EtheRx Stackable 10/100TX Dual-Speed hubs conform to
IEEE802.3u 100BASE-TX, IEEE802.3i 10BASE-T, and IEEE802.3 CSMA/CD
standards. Using any combination of the dual-speed hubs, you can stack up to a
maximum of four hubs.
For ease of installation, the Fast EtheRx Stackable Dual Speed hubs offer eight (8),
sixteen (16), or twenty-four (24) UTP ports that auto-negotiate 10/100Mbps operation
and an uplink port that allows the last UTP port on the hub to support both crossover and
straight-through cabling. By default port 7 & 8 (KND810TX & KND1610TX) or port 23
& 24 (KND2410TX) are set for auto-negotiation but can be manually configured for
either 10Mbps or 100Mbps operation, using the dip switches located on the back of the
unit. Ideal for inter-connecting 10BASE-T Ethernet networks with 100BASE-TX Fast
Ethernet networks, the Fast EtheRx Dual-speed hubs can also be used as simple stand-
alone 10BASE-T or 100BASE-TX repeaters. For easy trouble-shooting, the front panel
includes a variety of diagnostic LEDs such as Power, Collision for 10Mbps and
100Mbps, 100TX, Link, and Activity status.
For the remainder of this manual, the Fast EtheRx Stackable 10/100TX Dual-Speed hubs
will be referred to collectively as the Fast EtheRx Dual-Speed hubs:
will be referred to collectively as the Fast EtheRx Dual-Speed hubs:
KND810TX - Fast EtheRx Stackable 8-port Rack-mountable dual-speed hub
KND1610TX - Fast EtheRx Stackable 16-port Rack-mountable dual-speed hub
KND2410TX - Fast EtheRx Stackable 24-port Rack-mountable dual-speed hub
Model Types
Fig. 1-1 – KND810TX, KND1610TX, & KND2410TX
24
5
6
7
8
9
10
11
12
17
18
19
20
1
2
3
4
13
14
15
16
21
22
23
24
PWR
100
10
COLL
100TX
L I N K
/ ACT
1
2
3
4
5
6
7
8